Our radio package includes your choice of radio and all the parts needed to install that specific radio plus a discount.
The package includes the radio, radio wiring harness, steering wheel programmer, plug and play converter, AM/FM antenna adapter, radio mounting kit, radio removal keys and microphone housing.
Just answer the questions below and we will take care of the rest.
The main harness above has an ISO connector instead of bare wires on the end of them. The ISO connector can connect into a handful of radios. For the rest of the radios we have this plug and play converter. On one end It connects to the SRWH above. On the other end it connects directly into your radio. Check the google sheet on this products page to see if your radio will connect directly if you will need to buy a converter to do a cut free easy installation.
Use the list below to figure out which one you need.
This mic goes into the factory motion sensor that was never used in the united states.
This is the actual factory location mic.. In order to use this mic you have to take the mic out of the plastic housing to run it through the round hole and you have to make a small cut in the overhead console for the wire. We also sell this with just the housing if you want to break the microphone that came with your radio and use that one instead to save some money.
All 2006-2013 US Audi A3’s have a Sirius XM antenna on the roof. This wire is connected to the tuner in the trunk. The SAA-SIR600 is made to connect to the factory Sirius XM antenna cable in the trunk.
All SiriusXM ready radios require this external tuner in order to listen to SirusXM.
All aftermarket radios with GPS or Wireless CarPlay/Android Auto come with an external GPS antenna.
All 2006-2013 Audi A3’s with a factory GPS radio have a factory GPS antenna that you can use with your aftermarket radio using this adapter.
If your US A3 did not have factory navigation the antenna on the roof still has a GPS antenna cable. The cable is on the Drivers side behind the Sirius tuner. (See video in videos section)
You will need this extension cable to connect to this cable.
Reverse camera that replaces your factory trunk/hatch release handle.
This harness give you power for this or any camera from the wiring harness behind the radio. It connects to the main harness above.
The Concert II radio needs 2 keys the rest of the radios need 4 keys to be removed.
These tools come in handy when removing the cars interior trim.
These are the radios we recommend for your car.