ย
ย
For cars with a fiber optic amplifierย (not compatible with Burmeister)
Without a fiber optic amplifier
Visual Parking sensors without a fiber amplifier
Visual Parking sensors with a fiber amplifier. (not compatible with Burmeister)
If your car has radio controls on the steering wheel you will need to add this steering wheel control programmer.ย The harnesses above have the electronics built in but since the wire is radio specific it is sold separately.
This part connects to the end of the main SRWH wiring harness above and converts it into a plug that connects directly into the back of your new radio.ย Check the google sheet on the main page of the product below for applications.
Use the list below to figure out which one you need.
As far as we can tell all cars with navigation have a fiber optic amplifier.ย Send us an email with your vin number so we can verify.ย If you are replacing the fiber optic amplifier then you should use the interface without the fiber optic interface.
This antenna adapter converts the European style antenna connection into the universal style antenna connector used by most aftermarket radios.
If your car had a factory GPS antenna you can reuse the factory antenna if your new radio requires a GPS antenna. Don’t forget that all radios with wireless carplay also use a GPS antenna.
Your car uses the blue style..
If your car is equipped with factory Satellite radio we make a wire that allows you to reuse your factory antenna. (SAA-20-MUSTARD)
All SiriusXM ready radios require this external tuner in order to listen to SirusXM.
This harness give you power for this or any camera from the wiring harness behind the radio.ย You cannot power a camera using the main ahrness.
PPT-12345 Panel Pry tool set used to remove panels in your car.ย